Wika IPT-11 Uživatelský manuál stáhnout pdf (Strana 27)

Proceed as follows:

1 Edit the mbar value in the menu item "zero" with [OK].

Zero

000.0 %

+0000.0 mbar

0000.0 mbar

2 Set the requested mbar value with [+] and [->].

3 Conﬁrm with [+] and move to span adjustment with [->].

The zero adjustment is ﬁnished.

Information:

The zero adjustment shifts the value of the span adjustment. The span,

i.e. the diﬀerence between these values, however, remains u nchan-

ged.

Information:

For an adjustment with pressure, simply enter the actual measured

value indicated at the bottom of the display.

If the adjustment ranges are exceeded, the message "Outside

parameter limits" appears. The editing procedure can be aborted with

[ESC] or the displayed limit value can be accepted with [OK].

Proceed as follows:

1 Edit the mbar value in the menu item "span" with [OK].

Span

100.0 %

+1000.0 mbar

0000.0 mbar

Information:

The displayed pressure for 100 % corresponds to the nominal

measuring range of the sensor (in the above example 1 bar =

1000 mbar).

2 Set the requested mbar value with [->] and [OK].

3 Conﬁrm with [OK] and move to the menu overview with [ESC].

The span adjustment is ﬁnished.

Information:

For an adjustment with pressure, simply enter the actual measured

value indicated at the bottom of the display.

Carrying out zero ad-

justment

Carrying out span ad-

justment

Process pressure transmitter IPT-1* Vers. 3.0 - metalic sensor • 4 … 20 mA 27

6 Set up with the indicating and adjustment module

37300-EN-100302

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Žádné komentáře

Wika IPT-11 Uživatelský manuál Strana 27