Wika CPH6600 Uživatelský manuál stáhnout pdf (Strana 44)

44 WIKA operating instructions, model CPH6600

14005103.03 11/2012 GB/D

7. Maintenance, cleaning, and service / 8. Faults

7.3 Recalibration

DKD/DAkkS certicate - Certicates:

We recommend that the instrument is regularly recalibrated by the manufacturer, with

time intervals of approx. 12 months. Every factory recalibration includes, additionally,

an extensive free-of-charge check of all system parameters with respect to their

compliance with the specication. The basic settings will be corrected if necessary.

8. Faults

Display Reason Measures

Low battery power, device will

only work for a short while longer

Replace battery

-OL

Well above or below the limits of

the measuring range

Check: is the pressure within the

permissible measuring range of

the sensor?

--> Reduce the applied pressure

No display or

strange symbols,

device is not

responding to

input

Battery at Replace battery

System error Switch o the instrument, wait

for a short period of time, switch

on again

Technical fault Return to manufacturer for repair

CAUTION!

If faults cannot be eliminated by means of the measures listed above,

the hand-held pressure calibrator must be shut down immediately, and it

must be ensured that pressure and/or signal are no longer present, and it

must be prevented from being inadvertently put back into service.

In this case, contact the manufacturer.

If a return is needed, please follow the instructions given in chapter

9.2 "Return".

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 95 96

Žádné komentáře

Wika CPH6600 Uživatelský manuál Strana 44